[L0U]

Tucked makes the gap appear larger too. 255s et15 vs. 295 et19 is about 16mm further tucked under for the rears.

The fronts are closer to stock.

 

[GuardrailAL]

No Cleaning

I got the factory 20 " rims and my purchase gift from Porsche of Wallingford was getting the rims "murdered". On an all black car it certainly has a look and the beauty of it is when I wash the car I don't touch the rims. With the mat finish they look exactly the same not washed or washed. This is the best thing I ever did.

 

[ACW]

hey, you visited T.O. and yet you found a parking spot somewhere in downtown ..

Not downtown Toronto, this was at the Costco parking lot in Scarborough. When we went downtown to Yorkville, we actually found parking in one of the lots off Cumberland. Was surprised that they have turned a lot of the outdoor parking lots to park space as we used to park in an outdoor lot there.

 

[bobblehead]

It must have cost you a fortune to park at/near the trendy shopping district.

the old funny saying "how much ? I just want to park here, NOT to buy the parking spot"

 

[ACW]

It must have cost you a fortune to park at/near the trendy shopping district.

the old funny saying "how much ? I just want to park here, NOT to buy the parking spot"

We were thinking the same thing but having got used to the ridiculous rates in NYC, Toronto seemed reasonable. If I recall it was an automated lot and may have cost us less than $10 for two hours. In NYC that would have been $25 an hour but of course they have a daily maximum of only $69!!!

 

[JW3]

Awesome setup !

 

[L0U]

Tikore makes some pretty nice lug bolts in titanium. Low corrosion.

To fit our application they are M15x1.5, 28mm length, 19mm hex head, but if they are too big for the socket to fit the wheel you can use 17mm, ball seat unless the aftermarket wheels are conical seat, 2 piece (washers) work well with hub centric, otherwise go one piece.

I have a set coming in a few weeks.

 

[bobblehead]

^ Holy cow. You are spending mega $$$$$ just for bolts.

I was just looking at Mevius bolts and I thought they are expensive already.

 

[ACW]

^ Holy cow. You are spending mega $$$$$ just for bolts.

I was just looking at Mevius bolts and I thought they are expensive already.

Are the tikore the same as the Otis ones? Price seems the same. I got my RAD locknuts from the OTIS site as I needed cone seats for the BBS.

I have used mackin project kics bolts and they were awesome quality and super light. Assume the Mevius will be great as well.

 

[bobblehead]

Project Kics bolt M14 * 1.5 - ball is extremely hard to find. I do believe they make them but again, it's going to be $$$

Tikore is titanium. If I have a 981 spyder. I am all in

 

[ACW]

Otis are titanium as well. Wonder if they come from the same place?

 

[bobblehead]

they look the same. Otis might be just a reseller.

 

[L0U]

Hot looking. Couldn't help myself.

 

[silvermacan]

a matter of time….

@Mechanic

 

[rhoyle]

Yikes

 

[alex_cuva]

Is anybody here able to identify the make/model of the wheels here?

 

[JMacan911]

Is anybody here able to identify the make/model of the wheels here?

Not sure about those specific wheels, but HRE just introduced their new flow form wheel that is very similar.

HRE FlowForm - FF15 | HRE Performance Wheels

 

[alex_cuva]

Not sure about those specific wheels, but HRE just introduced their new flow form wheel that is very similar.

HRE FlowForm - FF15 | HRE Performance Wheels

The new flow forms definitely look very similar but are a bit more than I want to spend. I believe they start at around $3000 for the 18". I'm looking for 20-21's in a similar style for 500 or less per wheel.

 

[rhoyle]

Check with Wheel Dynamics?

 

[bobblehead]

They look like 22" - VFS2

Is anybody here able to identify the make/model of the wheels here?