[frankie]

I like

https://www.flickr.com/photos/baanvelgen/11729014485/in/photostream/

 

[L0U]

Radkonfigurator - Felgen und Räder Schnellsuche

These are a confirmed fit.

9x20 et20, 10x20 et20. heavy as ****, but nice to know the fit spec data.

 

[L0U]

HRE FF01 5x112 20x9 et25, 5x112 20x10.5 et35 flow formed is my guess.

http://www.hrewheels.com/wheels/hre-flowform/ff01

http://www.vividracing.com/catalog/hre-ff01-silver-flowform-wheel-20x105-5x120-35mm-p-150717933.html

 

[bobblehead]

^ do you know what style/mnodel they are ?

I talked to a local wheel shop (GTA) and he says HRE has nothing worked up yet for the Macan ? And this pic shows up.... ?????

 

[L0U]

Audi RS5 used in search gets you wheels that fit nearly identical to the macan. BUT not the same rubber.

 

[Jacque]

^ do you know what style/mnodel they are ?

I talked to a local wheel shop (GTA) and he says HRE has nothing worked up yet for the Macan ? And this pic shows up.... ?????

I emailed HRE a couple months ago and they replied saying they didn't have anything setup for Macan yet back then. Today I went to their website The World's Best Custom Forged Wheels for Motorsport, Performance, SUV and Luxury Vehicles | HRE Performance Wheels and if you click on "My Vehicle" and choose Porsche Macan, there are some wheels returned from the search, not sure if these are "confirmed" fit though.

I like HRE wheels a lot and used to have a P40...but they are expensive....>

 

[bobblehead]

Not going to spend like $8K for a set of forged wheels. But rather hoping to spend like $3K on a set of their Flow Form wheels, after all, my intention is to use them for winter set up. Well, if HRE has nothing, then I guess I will have to get stock or tirerack in a few months time.

I emailed HRE a couple months ago and they replied saying they didn't have anything setup for Macan yet back then. Today I went to their website The World's Best Custom Forged Wheels for Motorsport, Performance, SUV and Luxury Vehicles | HRE Performance Wheels and if you click on "My Vehicle" and choose Porsche Macan, there are some wheels returned from the search, not sure if these are "confirmed" fit though.

I like HRE wheels a lot and used to have a P40...but they are expensive....>

 

[ElevenTigers]

Hi Lou (wheel expert from AZ forum) my name is joe and i have a question about the wheel for macan. https://www.elementwheels.com/proddetail.asp?prod=gf62090blkgf620105blk

It ground force GF6 20x9 f, 20x10.5 r. What off set should i get? Factory off set 19F, 25R or 20 all around. Thanks

 

[L0U]

Hi Lou (wheel expert from AZ forum) my name is joe and i have a question about the wheel for macan. https://www.elementwheels.com/proddetail.asp?prod=gf62090blkgf620105blk

It ground force GF6 20x9 f, 20x10.5 r. What off set should i get? Factory off set 19F, 25R or 20 all around. Thanks

If you run stock rubber, then best bet is the et25 front on 9" rim and et20 rear on the 10.5" rim.

the site says universal bolt pattern...you need 5x112. call and ask if they custom drill them. get ball seat too if you can. bore size is 66.56 or you will need centring rings fitted in the wheel.

 

[ElevenTigers]

If running off set 20, what tire size would you recommend? Thanks

 

[L0U]

I haven't measured yet. The exact fit as stock would be 5x112 20x9 et25 with 265x45-20 tire fronts, and 5x112 20x10.5 et20 with 295x40-20 tire rears.

This will be within 1mm of oem wheels (19,26). the rears will be 1/2 inch wider than stock 10", but the et will make the tire fit almost exactly as stock. The 10.5" rim will actually closer match the fit of a 265 on a 9" rim.

If there is room after measuring, both wheels could be pushed 5mm more. those wheels also come in fronts et20 and rears et15. That might just be the best combo. its only 5mm more aggressive, so very likely to fit no problem.

 

[16v2911TT]

^ do you know what style/mnodel they are ?

I talked to a local wheel shop (GTA) and he says HRE has nothing worked up yet for the Macan ? And this pic shows up.... ?????

I emailed HRE a couple months ago and they replied saying they didn't have anything setup for Macan yet back then. Today I went to their website The World's Best Custom Forged Wheels for Motorsport, Performance, SUV and Luxury Vehicles | HRE Performance Wheels and if you click on "My Vehicle" and choose Porsche Macan, there are some wheels returned from the search, not sure if these are "confirmed" fit though.

I like HRE wheels a lot and used to have a P40...but they are expensive....>

I called Wheel Enhancement and they mentioned HRE has options for the Macan - forged $$$$$ and flow formed (shown above) which apparently is way cheaper but cast. They also told me those rear wheels are running with spacers.

FYI, those photos are on the hre website so i'm assuming they already have them available:
Porsche Macan with FF01 in Liquid Silver | HRE Performance Wheels

 

[duvinclunk]

Nay on Giovanna! Yay on BBS, HRE.

Btw, bolt circle is 5x112, center bore is 66.56

How sure are you of this?

 

[windblow]

How sure are you of this?

100%. It's well documented. BBS provides the wheels and its website confirmed the specs.

 

[L0U]

Borbet xa in 20x9 can be had in et 20 or 25. They have a factory look to them. Around 1000 euro for a set.

 

[bobblehead]

BC Forged HB29. Custom sizing. Any thoughts ?

 

[L0U]

http://www.tyreleader.co.uk/alloy-w...tyreleader.co.uk/alloy-wheels/oz/superturismo-dakar-1/10x20-5x112-et26-79-57208

nice OZ in 20x10 et26.

 

[L0U]

Vornsteiner VS110

 

[bobblehead]

^ they are about $3400 Cdn + taxes. (No tires, of course)


For 19", $3100 cash ... all included (No tires, of course)

I got quoted from Simply Tires

 

[yavery]

With all of these aftermarket/third-party wheels, does anyone know if the Porsche wheel caps can be snapped on those ? Would make it look a bit less aftermarket IMO ...