GTS - "PORSCHE" Logo and Model Designation - Gloss Black vs Satin Black vs Matte Black

906 Views 10 Replies 9 Participants Last post by EdenDPT, 14 d ago

reventon

Discussion Starter · 20 d ago

For the GTS build, there is a $0 option to make the "PORSCHE" logo in Matte Black and "Macan GTS" Model Designation in High Gloss Black, whereas this would cost $590 CAD for the S trim.

The Standard Features list has conflicting info on what kind of black is used as default with the GTS (under "Body" section shows Satin Black, but under "Exterior Foil" section shows Matte Black).

Does anyone know if there are any visually noticeable differences?

Hood Automotive lighting Grille Automotive tire Automotive tail & brake light

See less See more

Save

1 - 11 of 11 Posts

macanadian

· #2 · 20 d ago

Matte black and satin are the same. Regardless of which option you pick, the PORSCHE letters are satin black and pretty much disappear against the black taillight.

I went gloss black on the Macan GTS and then upgraded the Porsche letters to the satin silver ones from a 992

Save

Reactions: 1

ilumo

· #3 · 19 d ago

macanadian said:
Matte black and satin are the same. Regardless of which option you pick, the PORSCHE letters are satin black and pretty much disappear against the black taillight.

I went gloss black on the Macan GTS and then upgraded the Porsche letters to the satin silver ones from a 992

Curious where you got the “upgraded” Porsche letters from for your 2023. I want to switch out my letters but want to get an exact fit. I actually want to go with Matt or gloss black. Thanks!

Save

yrralis1

· #4 · 19 d ago

Bone stock . Satin .

Car Vehicle registration plate Wheel Vehicle Tire

See less See more

Save

Reactions: 3

JoeInBucks

· #5 · 19 d ago

I really don't like the full width tail lights. Why bother putting the Porche logo in the center when it's hardly visible whether its gloss black, satin black or silver/chrome. It's a muddled mess. The gen 1 rear end is much cleaner. Another example of making changes just for the sake of change.

Save

Reactions: 1

macanadian

· #6 · 19 d ago

ilumo said:
Curious where you got the “upgraded” Porsche letters from for your 2023. I want to switch out my letters but want to get an exact fit. I actually want to go with Matt or gloss black. Thanks!

I got them off ebay. They're from a 992 Turbo and were tough to find.

Automotive tail & brake light Car Grille Vehicle Automotive lighting

The Macan GTS ones are satin / matte black so any dealer / online store will have them.

The 992 also has a gloss black version.

See less See more

Save

pierre458

· #7 · 19 d ago

I always follow this rule :
Matt/Satin elements (plastic, wheel, logo...) on a gloss body paint.
Gloss black elements on a Matt/Satin body paint or wrapping

Save

David0413

· #8 · 16 d ago

I would go satin if your exterior will be light colored. Gloss if going with a darker exterior.

Save

caglenator

· #9 · 16 d ago

JoeInBucks said:
I really don't like the full width tail lights. Why bother putting the Porche logo in the center when it's hardly visible whether its gloss black, satin black or silver/chrome. It's a muddled mess. The gen 1 rear end is much cleaner. Another example of making changes just for the sake of change.

You're gonna have a hard time ordering that on a new GTS, I would think.

Save

JoeInBucks

· #10 · 16 d ago

caglenator said:
You're gonna have a hard time ordering that on a new GTS, I would think.

My CPO period ends March 2024. As I only have 43,000 miles at present on my Turbo, there is a good chance I’ll get some extended warranty insurance and keep it for a few more years. Maybe get the Cobb Tune and I’ll be as good as or better than a new GTS. And have a nice tight rear end to look at.

Save

Reactions: 1

EdenDPT

· #11 · 14 d ago

Matte black is satin black……😂

Save

1 - 11 of 11 Posts

Top Contributors this Month