Porsche Macan Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
This is my first post but I didn't see this concern addressed yet.

Long story short I just had to get my front bumper and grille replaced. It took two months to get into the shop recommended by the dealership and another two months to get my car back. It was a dark and rainy day so after the repair tech showed me everything I just hopped in and drove away.

When I got out of the car I noticed this massive panel gap on both sides of the hood. I called the repair shop and they said they'd be happy to adjust it but it won't really help since it will just make the gap on the other side bigger.

It just looks like the hood wasn't quite formed correctly. If I lean on the hood the panel gaps close and everything looks great.

Has anyone run into this issue before? Im thinking maybe if I just invited one of my heftier friends over we could just lean on each side and form the hood into shape.

More realistically I want to try leaning some padded pieces of wood on each side overnight and see if the aluminum takes the shape.

I can live with it but this is my first Porsche and a panel gap right there on the hood is such an eye sore once you see it.



Tire Wheel Automotive lighting Hood Automotive tire
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #9 ·
I have a friend who many years ago rejected a delivery of a car that looked like this. It is a known issue with the first generation car and some have it others don’t. I had one that had minor gap and it was repaired as best as it could be. The clamshell hood is very difficult to align. It clearly is a quality control deficit that it wasn’t remedied early on in the production. By the second and third generation however these problems almost disappeared. Without even asking you my guess is your car is a first generation car. If not then your body shop simply did a terrible job. View attachment 258438
You nailed it haha. Thank you!
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #10 ·
Unacceptable!
What MY is your Macan?
Were repairs done at a Porsche Certified repair center?

I wonder if they sourced the wrong hood? There have been some minor changes to the hood during model refreshes. Resulting in changes to the under hood insulation pad.

See my Thread:

Its a 2016. It was Stuttgart Auto in Denver, where the dealership recommended.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #11 ·
This is super easy to adjust- there are two 'catches' on each side with locating pins. I made minor adjustments on mine when I got it, because it wasn't quite perfect, but my car was used and has 75k+ miles on it.

If I paid for body work to be done I would take it back to the shop that did it, and let them screw with it, because it can impact how the hood opens/closes, and each time you move one thing, it effects the others on our large one-piece hood/fender clamshell things.
Thanks man I'll start there. It does look like the hood is just straight up a litttttle too big so it might be the wrong MY.
 
1 - 4 of 4 Posts
Top