I ordered new unit solely for using AUX BT. Using carplay AUX with burmester speakers is just a pain in my ears. All the songs just sound wrong. There is no depth, no sound stage, no joy.
OK i hope the 6 Isudar sent me will reduce the 20 minutes Don16 used up in his install videoOnly 3. If you have the Sirius/XM module and want to keep it, you’ll need 3 additional standoffs install on top of the standoffs provided so that the Isudar module can clear Sirius/XM.
Sent from my iPhone using Tapatalk
Yes you can control from PCM3.1 to skip tracks etc..Quick question- I have a NetworkWWS adapter which has decent sound quality (for those of you with buzzing, make sure you don't have a loop in your wiring around anything that carries power as this will cause alternator whine) but no support of track skip/advance in either AA or Carplay. I was wondering if this single-board iSudar setup supports the PCM buttons on the faceplate for controlling audio sources via Carplay/AA. I know Joyeauto does. Also, for those of you on Android, I have an AAWireless adapter that plugs into the USB port, and one feature it has is 'BT audio sink' which reroutes audio from Android Auto to A2DP Bluetooth audio. In its current state it does not pass along Google Assistant or Maps voice prompts but they say they'll look into it. I will keep people posted on progress if that is of interest. Thanks!
If you already have the factory fit Bluetooth then correct, you do not need to install microphone that comes with the jw
Turns out that my original mic is now working. Not sure if it was one of the firmware updates that I did, but is working now. Removed the provided mic, selected original mic, and is working well…I just put it on the trim under the steering wheel column. Used double sided tape.
great to hear - yes it seems overkill to have another mic the more integrated the betterTurns out that my original mic is now working. Not sure if it was one of the firmware updates that I did, but is working now. Removed the provided mic, selected original mic, and is working well…
Experienced some intermitent audio interruptions with AUXBT, not related to the CarPlay board. Apparently a known issue with PCM… maybe surfaced after I updated PCM to 4.76, as this was not an issue before. Re-paired the iPhone to PCM again, and it hasn’t happened again. Will continue to monitor.
observations so far (i'm not an audio /electronics guy by any means):